VO Randonneur Front Rack, Stainless Steel

This is the rack that we developed for our Randonneur frames. It may also be used on other bikes without eyelets on the fork blades with the included, P-clamps.

They are made from polished tubular stainless steel just like out other racks and have eyelets for lights and a fender mount. The weight is 212gm.

Ideally, the tang at the back is attached to the fender boss under the fork crown, or you may use the included fork crown daruma. The tang may also be bent up and attached to the brake bolt.

This rack does not mount to low-rider bosses or on canti-brake bikes. It requires eyelets on the fork blades or p-clamps. If you are having a frame built, please tell your builder that the eyelets should be about 3.75" below the bottom of the fork crown, but it's best to give the builder the rack beforehand.

Click here to download instructions or take a look at the VO technical support page.

Note: This is the first production run from a new factory and the welding on the light eyelets is not quite up to our usual standards, but for now it's all we have.